root> show version Model: srx300 Junos: 15.1X49-D50.3 JUNOS Software Release [15.1X49-D50.3]
root> show system alarms 2 alarms currently active Alarm time Class Description 2024-05-13 08:18:30 UTC Minor Autorecovery information needs to be saved 2024-05-13 08:18:25 UTC Minor Rescue configuration is not set
root> show chassis hardware Hardware inventory: Item Version Part number Serial number Description Chassis CV3316AF0875 SRX300 Routing Engine REV 0x08 650-065039 CV3316AF0875 RE-SRX300 FPC 0 FPC PIC 0 6xGE,2xGE SFP Base PIC Power Supply 0
root> show system autorecovery state Configuration: File Recovery Information Integrity Check Action / Status rescue.conf.gz Not Saved Not checked Requires save BSD Labels: Slice Recovery Information Integrity Check Action / Status s1 Saved Passed None s2 Saved Passed None s3 Saved Passed None s4 Saved Passed None
root> show chassis environment Class Item Status Measurement Temp Routing Engine OK 34 degrees C / 93 degrees F Routing Engine CPU OK 49 degrees C / 120 degrees F Power Power Supply 0 OK
root> show system boot-messages kld_map_v: 0x8ff80000, kld_map_p: 0x0 Running in PARTITIONED TLB MODE Copyright (c) 1996-2016, Juniper Networks, Inc. All rights reserved. Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. JUNOS 15.1X49-D50.3 #0: 2016-05-28 20:02:37 UTC builder@ralenth.juniper.net:/volume/build/junos/15.1/service/15.1X49-D50.3/obj/octeon/junos/bsd/kernels/JSRXNLE/kernel can't re-use a leaf (debug)! JUNOS 15.1X49-D50.3 #0: 2016-05-28 20:02:37 UTC builder@ralenth.juniper.net:/volume/build/junos/15.1/service/15.1X49-D50.3/obj/octeon/junos/bsd/kernels/JSRXNLE/kernel real memory = 4294967296 (4194304K bytes) avail memory = 2621882368 (2500MB) FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs Security policy loaded: JUNOS MAC/runasnonroot (mac_runasnonroot) Security policy loaded: Junos MAC/veriexec (mac_veriexec) Security policy loaded: JUNOS MAC/pcap (mac_pcap) MAC/veriexec fingerprint module loaded: SHA256 MAC/veriexec fingerprint module loaded: SHA1 netisr_init: !debug_mpsafenet, forcing maxthreads from 2 to 1 cpu0 on motherboard : CAVIUM's OCTEON 70XX/71XX CPU Rev. 0.2 with no FPU implemented L1 Cache: I size 78kb(128 line), D size 32kb(128 line), thirty two way. L2 Cache: Size 512kb, 4 way obio0 on motherboard uart0: on obio0 uart0: console (9600,n,8,1) twsi0 on obio0 set clock 0x58 xhci0: on obio0 usb0: on xhci0 usb0: USB revision 3.0 uhub0: vendor 0x0000 XHCI root hub, class 9/0, rev 3.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered xhci1: on obio0 usb1: on xhci1 usb1: USB revision 3.0 uhub1: vendor 0x0000 XHCI root hub, class 9/0, rev 3.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered cpld0 on obio0 pcib0: on obio0 Disabling Octeon big bar support pcib0: Initialized controller pci0: on pcib0 pci0: at device 0.0 (no driver attached) pci0: at device 0.1 (no driver attached) gblmem0 on obio0 octpkt0: on obio0 cfi0: on obio0 cfi1: on obio0 umass0: ATP Electronics ATP CG eUSB, rev 2.00/11.00, addr 2 Timecounter "mips" frequency 1200000000 Hz quality 0 Registered AMT tunnel Encap with UDP Tunnel! Loading Redundant LT driver ###PCB Group initialized for udppcbgroup ###PCB Group initialized for tcppcbgroup Kernel thread "wkupdaemon" (pid 47) exited prematurely. da0 at umass-sim0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-4 device da0: 40.000MB/s transfers da0: 7672MB (15712256 512 byte sectors: 255H 63S/T 978C) Trying to mount root from ufs:/dev/da0s1a WARNING: / was not properly dismounted WARNING: / was not properly dismounted WARNING: R/W mount of /cf/var denied. Filesystem is not clean - run fsck
【Juniper】 ジュニパー SRX300 サービスゲートウェイ 初期化済
■附属品 アダプタのみ
■商品詳細
動作確認の範囲:知識不足、環境不足のため以下の範囲となります。
1:入電確認
2:内部データ初期化
3:下記コンソール出力ログにて程度の判断お願いします。
※ポートのチェックはしておりません。
※通信の確認はしておりません。
※動作の保証は通電と初期化の2点となります。その他につきましては保証範囲外とさせていただきます。
ご了承の上、入札にご参加下さい。
root> show version
Model: srx300
Junos: 15.1X49-D50.3
JUNOS Software Release [15.1X49-D50.3]
root> show system alarms
2 alarms currently active
Alarm time Class Description
2024-05-13 08:18:30 UTC Minor Autorecovery information needs to be saved
2024-05-13 08:18:25 UTC Minor Rescue configuration is not set
root> show chassis hardware
Hardware inventory:
Item Version Part number Serial number Description
Chassis CV3316AF0875 SRX300
Routing Engine REV 0x08 650-065039 CV3316AF0875 RE-SRX300
FPC 0 FPC
PIC 0 6xGE,2xGE SFP Base PIC
Power Supply 0
root> show system autorecovery state
Configuration:
File Recovery Information Integrity Check Action / Status
rescue.conf.gz Not Saved Not checked Requires save
BSD Labels:
Slice Recovery Information Integrity Check Action / Status
s1 Saved Passed None
s2 Saved Passed None
s3 Saved Passed None
s4 Saved Passed None
root> show chassis environment
Class Item Status Measurement
Temp Routing Engine OK 34 degrees C / 93 degrees F
Routing Engine CPU OK 49 degrees C / 120 degrees F
Power Power Supply 0 OK
root> show system boot-messages
kld_map_v: 0x8ff80000, kld_map_p: 0x0
Running in PARTITIONED TLB MODE
Copyright (c) 1996-2016, Juniper Networks, Inc.
All rights reserved.
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
JUNOS 15.1X49-D50.3 #0: 2016-05-28 20:02:37 UTC
builder@ralenth.juniper.net:/volume/build/junos/15.1/service/15.1X49-D50.3/obj/octeon/junos/bsd/kernels/JSRXNLE/kernel
can't re-use a leaf (debug)!
JUNOS 15.1X49-D50.3 #0: 2016-05-28 20:02:37 UTC
builder@ralenth.juniper.net:/volume/build/junos/15.1/service/15.1X49-D50.3/obj/octeon/junos/bsd/kernels/JSRXNLE/kernel
real memory = 4294967296 (4194304K bytes)
avail memory = 2621882368 (2500MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
Security policy loaded: JUNOS MAC/runasnonroot (mac_runasnonroot)
Security policy loaded: Junos MAC/veriexec (mac_veriexec)
Security policy loaded: JUNOS MAC/pcap (mac_pcap)
MAC/veriexec fingerprint module loaded: SHA256
MAC/veriexec fingerprint module loaded: SHA1
netisr_init: !debug_mpsafenet, forcing maxthreads from 2 to 1
cpu0 on motherboard
: CAVIUM's OCTEON 70XX/71XX CPU Rev. 0.2 with no FPU implemented
L1 Cache: I size 78kb(128 line), D size 32kb(128 line), thirty two way.
L2 Cache: Size 512kb, 4 way
obio0 on motherboard
uart0: on obio0
uart0: console (9600,n,8,1)
twsi0 on obio0
set clock 0x58
xhci0: on obio0
usb0: on xhci0
usb0: USB revision 3.0
uhub0: vendor 0x0000 XHCI root hub, class 9/0, rev 3.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
xhci1: on obio0
usb1: on xhci1
usb1: USB revision 3.0
uhub1: vendor 0x0000 XHCI root hub, class 9/0, rev 3.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
cpld0 on obio0
pcib0: on obio0
Disabling Octeon big bar support
pcib0: Initialized controller
pci0: on pcib0
pci0: at device 0.0 (no driver attached)
pci0: at device 0.1 (no driver attached)
gblmem0 on obio0
octpkt0: on obio0
cfi0: on obio0
cfi1: on obio0
umass0: ATP Electronics ATP CG eUSB, rev 2.00/11.00, addr 2
Timecounter "mips" frequency 1200000000 Hz quality 0
Registered AMT tunnel Encap with UDP Tunnel!
Loading Redundant LT driver
###PCB Group initialized for udppcbgroup
###PCB Group initialized for tcppcbgroup
Kernel thread "wkupdaemon" (pid 47) exited prematurely.
da0 at umass-sim0 bus 0 target 0 lun 0
da0: Fixed Direct Access SCSI-4 device
da0: 40.000MB/s transfers
da0: 7672MB (15712256 512 byte sectors: 255H 63S/T 978C)
Trying to mount root from ufs:/dev/da0s1a
WARNING: / was not properly dismounted
WARNING: / was not properly dismounted
WARNING: R/W mount of /cf/var denied. Filesystem is not clean - run fsck
■中古品なので多少の汚れ等がありますので神経質な方は、入札ご遠慮下さい。
■土、日、祝はお休みをいただいておりますのでお返事が遅れる場合がございます。勝手では御座いますがご了承ください。
[北海道] 1000円 (北海道)
[北東北] 900円 (青森、岩手、秋田)
[南東北] 800円 (山形、宮城、福島)
[ 関東 ] 800円 (茨城、栃木、群馬、埼玉、千葉、東京、神奈川、山梨、新潟、長野)
[ 中部 ] 800円 (静岡、愛知、岐阜、三重、富山、石川、福井)
[ 関西 ] 800円 (滋賀、京都、大阪、兵庫、奈良、和歌山)
[ 中国 ] 800円 (鳥取、岡山、島根、広島、山口)
[ 四国 ] 800円 (香川、徳島、愛媛、高知)
[ 北九州 ] 900円 (福岡、佐賀、長崎、大分)
[ 南九州 ] 1000円 (熊本、宮崎、鹿児島)
ただし、沖縄地域、その他離島など中継料のかかる地域に関しましては中継料のご負担お願いいたします。
■支払う金額は【落札金額+送料】となります。
■商品は入金確認後【2~3日以内】に商品を発送後【問い合わせ番号】を案内いたします。