**在庫はありません、納期約10-15日間です。メーカーで欠品中の場合は納期未定になります。 事前に在庫の確認してください。
リジッドリアフェンダーは、1951-57リジッドモデルのようにチェーンリリーフ用の切り抜きを備え、クリップに取り付けられたステンレスフェンダートリムを受け入れます。
フェンダーは7/8インチの広いブラケットと来、テールランプの穴を持っていません。プライマーまたはペイントインストーラで終了する前にフェンダーテールとブラケットの位置合わせをチェックしてフェンダーを準備する必要があります。ヒンジ付きフェンダーはすべて、ヒンジとピンの領域に手で取り付ける必要があります。コンポーネントに合わせて調整および調整する必要があります。プライミングや塗装の前に、フェンダー本体、ブレース、取り付けポイントを所定の位置に収めます。フェンダーリベット、ヒンジ、ブラケットは、最終的なフィットメントのために微調整する必要があります。左側のフェンダーレリーフプレートは、メインフェンダー本体の一部として内蔵されています。*注:充填する必要があるフェンダーに穴があります。*注:最適な更新されたヒンジは、私たちのフェンダーに交換したい復元者のために利用可能です。
取り付けモデル
FL 1955-1957
VT No: 50-0142
OEM No: 59604-55
Rigid rear fender features a cutout for the chain relief as on 1951-57 rigid models and accept stainless fender trim attached by clips.
Fender comes with a 7/8" wide bracket and does not have a tail lamp hole. Before finishing with primer or paint installer must prepare fender by checking alignment of fender tail and bracket. All hinged fenders must be hand fitted at the hinge and pin area. Alignment will have to be adjusted and tweaked to fit your components. Before priming or painting, fit the fender body, braces and mounting points in place. Fender rivets, hinge and brackets will have to be tweaked for final fitment. ersize" for shipment, as compared to the actual weight, which will result in higher shipping costs.
Fits:
FL 1955-1957
UOM: 1 - EA
Country of Origin: Imported
注意事項
郵便番号658-0048
兵庫県神戸市東灘区御影郡家1-2-6 JR高架下24号
電話番号:078-856-2223
FAX:078-856-5570
営業時間:11:00~19:00
定休日、水曜日
有限会社カチナ カチナパーツ
*ハーレーダビッドソン、パーツ専門店
*逆輸入車の日本車パーツ、ヨーロッパ.パーツの輸入
*Harley Davidson, parts specialty store
スチール製
品番50-0142 OEM No: 59604-55 V-twin製
取り付けモデル
1955-1957、FL
**在庫はありません、納期約10-15日間です。メーカーで欠品中の場合は納期未定になります。 事前に在庫の確認してください。
リジッドリアフェンダーは、1951-57リジッドモデルのようにチェーンリリーフ用の切り抜きを備え、クリップに取り付けられたステンレスフェンダートリムを受け入れます。 フェンダーは7/8インチの広いブラケットと来、テールランプの穴を持っていません。プライマーまたはペイントインストーラで終了する前にフェンダーテールとブラケットの位置合わせをチェックしてフェンダーを準備する必要があります。ヒンジ付きフェンダーはすべて、ヒンジとピンの領域に手で取り付ける必要があります。コンポーネントに合わせて調整および調整する必要があります。プライミングや塗装の前に、フェンダー本体、ブレース、取り付けポイントを所定の位置に収めます。フェンダーリベット、ヒンジ、ブラケットは、最終的なフィットメントのために微調整する必要があります。左側のフェンダーレリーフプレートは、メインフェンダー本体の一部として内蔵されています。*注:充填する必要があるフェンダーに穴があります。*注:最適な更新されたヒンジは、私たちのフェンダーに交換したい復元者のために利用可能です。 取り付けモデル FL 1955-1957
VT No: 50-0142
OEM No: 59604-55
Rigid rear fender features a cutout for the chain relief as on 1951-57 rigid models and accept stainless fender trim attached by clips.
Fender comes with a 7/8" wide bracket and does not have a tail lamp hole. Before finishing with primer or paint installer must prepare fender by checking alignment of fender tail and bracket. All hinged fenders must be hand fitted at the hinge and pin area. Alignment will have to be adjusted and tweaked to fit your components. Before priming or painting, fit the fender body, braces and mounting points in place. Fender rivets, hinge and brackets will have to be tweaked for final fitment. ersize" for shipment, as compared to the actual weight, which will result in higher shipping costs.
Fits:
FL 1955-1957
UOM: 1 - EA
Country of Origin: Imported
郵便番号658-0048
兵庫県神戸市東灘区御影郡家1-2-6 JR高架下24号
電話番号:078-856-2223
FAX:078-856-5570
営業時間:11:00~19:00
定休日、水曜日
有限会社カチナ カチナパーツ
*ハーレーダビッドソン、パーツ専門店
*逆輸入車の日本車パーツ、ヨーロッパ.パーツの輸入
*Harley Davidson, parts specialty store
・ゆうパック/ヤマト便
+ + + この商品説明は オークションプレートメーカー2 で作成しました + + +
No.201.003.006