TIMEX programmed with latest image MLAN init done: ready to connect to the network BCM5482PhyInit () : Port 0 --> SFP Not present BCM5482PhyInit () : Port 1 --> SFP Not present
set_chassis_type: chassis_type=0xef0400 found=TRUE ASR9001E (P40X0 PPC) RSP platform with 8192 Mb of main memory
program load complete, entry point: 0x100000, size: 0x2ac20 Set baud rate to: 9600 program load complete, entry point: 0x100000, size: 0x2ac20 Set baud rate to: 9600 MBI Candidate = disk0:asr9k-os-mbi-6.1.4/0x100000/mbiasr9k-rp.vm
CARD_SLOT_NUMBER: 0 CPU_INSTANCE: 1 MBI Validation starts ...
Disabling both Mgt LAN ports Enabling Cluster Port 0 and disabling Port 1 BCM5482 cluster port-1 reset done !! Port 0. SFP Not Ready (0:0). Init failed
dtsec_init_hw: configuring DTSEC (port 8) for: 1GB, Full Duplex Interface link changed state to UP. Interface link state up.
MBI validation sending request. HIT CTRL-C to abort .......... No MBI confirmation received from dSC
CARD_SLOT_NUMBER: 0 CPU_INSTANCE: 1 MBI Validation starts ... Enabling Cluster Port 1 and disabling Port 0 BCM5482 cluster port-0 reset done !! Port 1. SFP Not Ready (0:0). Init failed
dtsec_init_hw: configuring DTSEC (port 8) for: 1GB, Full Duplex Interface link changed state to UP. Interface link state up.
MBI validation sending request. HIT CTRL-C to abort .......... No MBI confirmation received from dSC
Boot Status 16 program load complete, entry point: 0x100000, size: 0x2ac20 Set baud rate to: 9600
MBI size from header = 21979816,Bootflash resident MBI filesize = 21979816 .................................................................................... program load complete, entry point: 0x204184, size: 0x14f53a8
Boot Status 17 Config = SMP, Running = SMP Board type: 0x00100401 Card Capability = 0x00000000 ############################################# BSP: Board type : ASR9K-RSP-I tracelogger: starting tracing in background ring mode tracelogger running with args: -startring -F 1 -F 2 Restricted Rights Legend
Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c) of the Commercial Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc. 170 West Tasman Drive San Jose, California 95134-1706
Cisco IOS XR Software for the Cisco XR ASR9K, Version 6.1.4 Copyright (c) 2017 by Cisco Systems, Inc. Jan 31 23:44:18.956: Install Setup: Booting with committed software Initializing Punt-switch ... Initializing Punt-switch ... Set RP CPU Cluster port in DSA mode Init STP group for Cluster ports forwarding state control done Cluster: Boot Request Filter configured Cluster: Control Link monitor proto filter configured Successfully initialized punt-switch(26 ports). SPP has connected to PAKMAN.... SPP registered CPU port 4 with DPAA SPP Port Idx 0 MAC addr --> 00:70:72:00:00:08 RP/0/RSP0/CPU0:Jan 31 23:43:48.748 : imio[64]: %PLATFORM-IMIO-3-OPERATION_NOTIFY : imio_main: cold start
【製品仕様】
・GLC-SX-MMD×1本
・SFP-10G-SR×3本
【起動ログ】
Starting Initialization of FMAN0
Loading ucode for FMAN0, size: 6992, ver: 101.08.00
Starting Initialization of FMAN1
Loading ucode for FMAN1, size: 6992, ver: 101.08.00
Serdes Protocol: 0x10
CPU Reset Reason = 0x0001
Initializing GIGE SW...
PPC P40X0 (partnum 0x8023), Revision 03.00, (Core Version 03.01)
Sys Clock: 100 Mhz
Core Clock: 1500 Mhz
Plat Clock: 800 Mhz
LBC Clock: 25 Mhz
MEM Clock: 1300 Mhz
System Bootstrap, Version 3.4(20160331:102636) [ASR9K ROMMON],
Copyright (c) 1994-2016 by Cisco Systems, Inc.
Compiled Thu 31-Mar-16 15:56 by skumarss
Board Type: 0x100401
CPU Board => Rev: 0x3
=========
FPGA ver: 01.0f
CBC: 16.72
DTI programmed with latest image
TIMEX programmed with latest image
MLAN init done: ready to connect to the network
BCM5482PhyInit () : Port 0 --> SFP Not present
BCM5482PhyInit () : Port 1 --> SFP Not present
set_chassis_type: chassis_type=0xef0400 found=TRUE
ASR9001E (P40X0 PPC) RSP platform with 8192 Mb of main memory
program load complete, entry point: 0x100000, size: 0x2ac20
Set baud rate to: 9600
program load complete, entry point: 0x100000, size: 0x2ac20
Set baud rate to: 9600
MBI Candidate = disk0:asr9k-os-mbi-6.1.4/0x100000/mbiasr9k-rp.vm
CARD_SLOT_NUMBER: 0
CPU_INSTANCE: 1
MBI Validation starts ...
Disabling both Mgt LAN ports
Enabling Cluster Port 0 and disabling Port 1
BCM5482 cluster port-1 reset done !!
Port 0. SFP Not Ready (0:0). Init failed
dtsec_init_hw: configuring DTSEC (port 8) for: 1GB, Full Duplex
Interface link changed state to UP.
Interface link state up.
MBI validation sending request.
HIT CTRL-C to abort
..........
No MBI confirmation received from dSC
CARD_SLOT_NUMBER: 0
CPU_INSTANCE: 1
MBI Validation starts ...
Enabling Cluster Port 1 and disabling Port 0
BCM5482 cluster port-0 reset done !!
Port 1. SFP Not Ready (0:0). Init failed
dtsec_init_hw: configuring DTSEC (port 8) for: 1GB, Full Duplex
Interface link changed state to UP.
Interface link state up.
MBI validation sending request.
HIT CTRL-C to abort
..........
No MBI confirmation received from dSC
AUTOBOOT: Boot string = disk0:asr9k-os-mbi-6.1.4/0x100000/mbiasr9k-rp.vm,1;
AUTOBOOT: autobootstate=0, autobootcount=0, cmd=boot disk0:asr9k-os-mbi-6.1.4/0x100000/mbiasr9k-rp.vm
Boot Status 16
program load complete, entry point: 0x100000, size: 0x2ac20
Set baud rate to: 9600
MBI size from header = 21979816,Bootflash resident MBI filesize = 21979816
....................................................................................
program load complete, entry point: 0x204184, size: 0x14f53a8
Boot Status 17
Config = SMP, Running = SMP
Board type: 0x00100401
Card Capability = 0x00000000
#############################################
BSP: Board type : ASR9K-RSP-I
tracelogger: starting tracing in background ring mode
tracelogger running with args: -startring -F 1 -F 2
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS XR Software for the Cisco XR ASR9K, Version 6.1.4
Copyright (c) 2017 by Cisco Systems, Inc.
Jan 31 23:44:18.956: Install Setup: Booting with committed software
Initializing Punt-switch ...
Initializing Punt-switch ...
Set RP CPU Cluster port in DSA mode
Init STP group for Cluster ports forwarding state control done
Cluster: Boot Request Filter configured
Cluster: Control Link monitor proto filter configured
Successfully initialized punt-switch(26 ports).
SPP has connected to PAKMAN....
SPP registered CPU port 4 with DPAA
SPP Port Idx 0 MAC addr --> 00:70:72:00:00:08
RP/0/RSP0/CPU0:Jan 31 23:43:48.748 : imio[64]: %PLATFORM-IMIO-3-OPERATION_NOTIFY
: imio_main: cold start
ios con0/RSP0/CPU0 is now available
Press RETURN to get started.
【注意事項等】
●商品内容は、本体及び上記付属品のみとなります。その他の付属品はありませんのでご注意ください。
●中古品ですので多少の擦り傷などはご容赦下さい。
●外装のみクリーニング済みです。